General Fabrication
Whatever you make — We have the bar for it
Fabricators work across industries, across applications, and across size requirements. You need a supplier with wide stock, consistent quality, and fast availability. That is what we deliver — from small quantities for workshops to full truck loads for large fabricators.
General Fabrication
The Right Grade at the Right Price — Full Size Range
Every product, every size, one supplier
Round bars from 16mm to 120mm. Hex bars from 8mm to 53mm. Flat bars from 20mm to 100mm width. Angles from 20x20mm to 100x100mm. Channels from 75x40mm to 150x65mm. One phone call, one invoice, one truck.
SS202 — 70% of the cost of SS304, 80% of the performance
For applications where extreme corrosion resistance is not required — indoor structures, equipment frames, decorative components, general engineering — SS202 delivers excellent value. Higher manganese content compensates for lower nickel, maintaining good strength and workability.
Plant price, not trader price
We are the manufacturer. When you buy from us, you pay plant price — not trader margin on top of plant price. For large-volume fabricators, this makes a material difference to project cost. We also issue MTC which distributors often cannot provide.
Grades
Grades we recommend for General Fabrication
| Grade | Why use it | Best for |
|---|---|---|
| SS202 | Low cost, good for indoor/dry use | General fabrication, frames, decorative, indoor structures |
| SS304 | Standard grade, excellent all-round performance | Outdoor, food-adjacent, general industrial fabrication |
| SS316 | Premium corrosion resistance | Marine, coastal, chemical-adjacent fabrication |
| SS430 | Ferritic, cost effective, magnetic | Decorative trim, cladding, non-critical parts |
Products
Recommended products
Round Bar
Enquire- Sizes
- 16–120mm
- Finish
- HRAP, Bright
- Use
- Shafts, rods, machined components
Bright Round Bar
Enquire- Sizes
- 5–120mm
- Finish
- Export Bright
- Use
- Precision components, spindles
Hex Bar
Enquire- Sizes
- 8–53mm AF
- Finish
- HR, Bright, Drawn
- Use
- Fastener and valve blanks
Square Bar
Enquire- Sizes
- 8–53mm
- Finish
- HR, Bright
- Use
- Key stock, brackets
Flat Bar
Enquire- Sizes
- 20–100mm wide
- Finish
- Pickled Polish
- Use
- Frames, guards, stiffeners
Angle Bar
Enquire- Sizes
- 20x20–100x100mm
- Finish
- Pickled Polish
- Use
- Structural framing
Channel
Enquire- Sizes
- 75x40–150x65mm
- Finish
- HR
- Use
- Supports, beams
Billet
Enquire- Sizes
- 75x75–140x140mm
- Finish
- Ground
- Use
- Forging, re-rolling
Applications
Where our material goes in your Workshop
- Equipment frames and machine bases
- Storage rack and shelving structures
- Guard rails and safety barriers
- Structural supports in factories and warehouses
- Decorative and architectural components
- Kitchen equipment frames
- Custom fabricated assemblies
- Export fabrication for Middle East and Africa
Fabricators
Why fabricators choose Navkardeep
Small and large orders both welcome
Whether you need 50kg for a single job or 10 MT for a large project, we supply both without minimum order penalties.
MTC with every order
Material Test Certificate with actual heat chemistry from our SPECTRO analyser — useful for projects where documentation is required.
Consistent chemistry, heat to heat
Our melt shop controls composition on every heat. Fabricators who machine or weld our material report consistent, predictable results.
Fast dispatch from central Gujarat
Our plant at Vijapur, Mehsana puts us in the centre of Gujarat's industrial corridor. Next-day delivery to Ahmedabad, Surat, Rajkot, Vadodara and Gandhinagar for most orders.
With every order
Every order comes with
- Mill Test Certificate with actual heat chemistry
- IS 6911 / ASTM A276 compliance
- ISO 9001:2015 certified manufacturing
- SPECTRO-verified composition
- Dispatch from Vijapur, Mehsana — central Gujarat logistics
Request a quote