ISO 9001:2015
Quality management system
- Certificate No.
- 4CCPC8
- Scope
- Manufacturer of Stainless Steel Billets, RCS, Round Bars, Bright Bars, Angle and Flat Bars, Channels, Hexagonal and Square Bars and Rebars
Quality
Quality assurance
Committed to delivering excellence through rigorous standards at every stage.
Certifications
Two management systems, audited every year
Both certificates are IAF-accredited. The scope covers everything we melt, roll and finish.
ISO 14001:2015
Environmental management system
- Certificate No.
- CFDFE207
- Scope
- Manufacturer of Stainless Steel Billets, RCS, Round Bars, Bright Bars, Channels, Hexagonal and Square Bars and Rebars
In-house laboratory
Our quality testing parameters
Quality assurance begins at the melt shop, with control of composition, structure and inclusion pattern for consistently clean steel. Every stage of production is tested against global standards.
- Optical emission spectrometerChemical composition verification — every heat tested before casting
- Portable handheld spectrometerField-ready spectrometer for on-site and incoming material verification
- Rockwell and Brinell hardness testersSurface and bulk hardness testing for mechanical property confirmation
- Corrosion resistance testingSalt spray and chemical exposure testing for grade performance verification
- Ultrasonic testing for internal soundnessNon-destructive internal defect detection to ensure structural integrity
- Mechanical propertiesTensile strength, yield strength and elongation testing per ASTM A276 and IS 6911
- Surface finish qualityVisual and dimensional surface inspection for finish consistency
- Dimensional accuracySize, straightness and tolerance verification per IS 6911
- Metallurgical examinationMicrostructure analysis to confirm grain structure and phase composition
- Certification and standards complianceMaterial Test Certificate issued with every consignment — heat number and chemistry included
Material Test Certificate
What our MTC covers
Every consignment leaves the plant with a heat-wise MTC, so your inspector can trace each bar to the heat it was cast from.
- Heat number
- Grade and standard
- Chemical composition
- Mechanical properties
- Product dimensions
- Our ISO certification reference
Source: ASTM A276 / IS 6911
Chemistry standards
Composition limits in weight percent for the grades we melt.
← scroll to see full table
| Element | SS202 | SS304 | SS316 | SS316L | SS430 |
|---|---|---|---|---|---|
| Cr % | 13–15 | 18–20 | 16–18 | 16–18 | 16–18 |
| Ni % | 4–6 | 8–10.5 | 10–14 | 10–14 | max 0.75 |
| C % | max 0.15 | max 0.08 | max 0.08 | max 0.03 | max 0.12 |
| Mn % | 7.5–10 | max 2 | max 2 | max 2 | max 1 |
| Mo % | — | — | 2–3 | 2–3 | — |
ISO 15510:2010 reference
Stainless steel grade equivalents — international standards
Designations across international standards. Rows set in full weight are the grades most often ordered from us.
← scroll to see full table
| Type | ISO name | EN | UNS | AISI | JIS | GB |
|---|---|---|---|---|---|---|
| M | X12Cr13 | 1.4006 | S41000 | 410 | SUS410 | S41010 |
| M | X12CrS13 | 1.4005 | S41600 | 416 | SUS416 | S41617 |
| M | X39Cr13 | 1.4031 | S42000 | 420 | — | S42040 |
| M | X19-430-20-1 | 1.4019, 1.4104 | S43020 | 430F | — | S11717 |
| F | X17CrNi16-2 | 1.4057 | S43100 | 431 | SUS431 | S43120 |
| F | X6CrAl13 | 1.4002 | S40500 | 405 | SUS405 | S11348 |
| A | X12CrMnNiN17-7-5 | 1.4372 | S20100 | 201 | SUS201 | S35350 |
| A | X12CrMnNiN18-9-5 | 1.4373 | S20200 | 202 | SUS202 | S35450 |
| A | X10CrNiS18-9 | 1.4305 | S30300 | 303 | SUS303 | S30110 |
| A | X2CrNi19-11 | 1.4306 | S30403 | 304L | SUS304L | S30403 |
| A | X5CrNi18-9 | 1.4301 | S30400 | 304 | SUS304 | S30408 |
| A | X2CrNiMo18-14-3 | 1.4435 | S31603 | 316L | SUS316L | S31603 |
| A | X5CrNiMo17-12-2 | 1.4401 | S31600 | 316 | SUS316 | S31608 |
A = Austenitic · F = Ferritic · M = Martensitic
This table is for information only. It has been carefully checked but may still contain unspotted errors. Source: ISO 15510:2010.