Round Bars
Black / hot-rolled rounds for machining, forging and fabrication
- Sizes
- 16 – 120 mm dia
- Grades
- SS202, SS304, SS316, SS316L, SS430
- Standard
- ASTM A276 / IS 6911
Our products
Product range
Hot rolled stainless steel long products — manufactured in-house from scrap to finished bar
3 products
Bars
Round, bright, hex and square bars for machining, forging, fasteners and shafts.
Bright Round Bars
Cold-drawn, peeled & polished — export finish, tight tolerance
- Sizes
- 5 – 120 mm dia
- Grades
- SS202, SS304, SS316, SS316L
- Standard
- ASTM A276 / A479
Hex & Square Bars
Drawn and annealed-pickled hex and square for fasteners and fittings
- Sizes
- 8 – 53 mm A/F
- Grades
- SS202, SS304, SS316, SS430
- Standard
- ASTM A276
3 products
Structural sections
Flats, angles and channels for fabrication, frames and architecture.
Flat Bars (Patta / Patti)
Pickled flats with plain ends — no burrs, no sharp edges
- Sizes
- 20 – 100 mm × 3 – 32 mm
- Grades
- SS202, SS304, SS316, SS430
- Standard
- ASTM A276 / IS 6911
Equal Angles
Structural & fabrication angles, pickled finish
- Sizes
- 20×20×3 – 100×100×12 mm
- Grades
- SS202, SS304, SS316, SS430
- Standard
- IS 6911
U Channels
Pickled channels for frames, rails and structures
- Sizes
- 75×40 – 150×65 mm
- Grades
- SS202, SS304, SS430
- Standard
- IS 6911
2 products
Semi-finished
Billets and RCS from our continuous caster for re-rollers and forgers.
Billets & Forging Ingots
Continuous-cast from our own melt shop for re-rollers and forgers
- Sizes
- 75×75 – 140×140 mm
- Grades
- SS202, SS304, SS316, SS430
Round Corner Squares (RCS)
Hot-rolled RCS for downstream re-rolling
- Sizes
- 45×45 – 90×90 mm
- Grades
- SS202, SS304, SS316
Grades
Know the grade before you order it.
Chemistry in weight percent, as melted and verified on our spectrometer. Pick a row for the full grade sheet.
| Grade | Cr % | Ni % | Mn % | Mo % | Corrosion | Cost | Typical use | Open |
|---|---|---|---|---|---|---|---|---|
| SS202200 series · Austenitic | 13–15 | 4–6 | 7.5–10 | — | ModerateNon-magnetic | Lowest | General fabrication, Architecture & railings, Kitchen & food equipment | |
| SS304300 series · Austenitic | 18–20 | 8–10.5 | ≤ 2 | — | GoodNon-magnetic | Medium | Food & dairy processing, Pharma & chemical equipment, Pumps, valves & shafts | |
| SS316300 series · Mo-bearing | 16–18 | 10–14 | ≤ 2 | 2–3 | ExcellentNon-magnetic | Higher | Chemical & petrochemical, Marine & coastal structures, Pharma process equipment | |
| SS316L300 series · Low carbon | 16–18 | 10–14 | ≤ 2 | 2–3 | ExcellentNon-magnetic | Higher | Heavy welded fabrications, Pressure vessels, Hygienic / pharma bright bars | |
| SS430400 series · Ferritic | 16–18 | ≤ 0.75 | ≤ 1 | — | ModerateMagnetic | Medium | Automotive trim, Appliances, Decorative & architectural |
Standards and documents
Standards
All products manufactured as per IS 6911, ASTM A276 and ASTM A479. Material Test Certificate issued with every consignment.